TAP - TrustedSec Attack Platform

   TAP is a remote penetration testing platform builder. For folks in the security industry, traveling often times becomes a burden and adds a ton of cost to the customer. TAP was designed to make the deployment of these boxes super simple and create a self-healing and stable platform to deploy remote penetration testing platforms. Essentially the concept is simple, you pre-configure a brand new box and run the TAP setup file. This will install a service on Linux that will be configured the way you want. What it will do is establish a reverse SSH tunnel back to a machine that’s exposed on the Internet for you. From there you can access the box locally from the server it connects back to. TAP automatically detects when an SSH connection has gone stale and will automatically rebuild it for you.

It also has a number of other options, for example, in the event you lose SSH, it’ll connect out to a text file and execute commands for you. Also updates itself continuously as well as ensure that you are running the latest packages for Ubuntu Linux (if that is your OS).

 

Install TAP:

python setup.py

Uninstall TAP:

python setup.py

 

TAP Instructions:

When setting up TAP, the questions you may have is the REMOTE ssh server, this would be an external box you have with SSH exposed. This would be your box you want the TAP machine to connect back to, the machine you have on the Internet waiting for connections. It is not recommended to use root as this is a security oversight. Use a normal user to establish the SSH tunnel. Right now its password only although later on trusdedsec will be adding support for SSH keys. The password is stored using AES however the cipher key storage is insecure at the moment. Someone with maintained access to the box could grab the cipher key and decrypt the password in the config with enough time and persistence.

The second is the LOCAL port that will be on the REMOTE box. When TAP connects back via reverse SSH, it connects to the REMOTE box and establishes a local port on the machine. When you SSH to the remote box on the Internet, you will want to ssh user@localhost -p . This will be the port TAP binds to on the REMOTE system so you can access it.

Once you configure that, TAP has a default path it pulls updates from, you can change this to your own update path. This part was intentionally kept off github so you can specify what you want for approved updates.

Next, you can send commands to the TAP, it checks every two minutes for new instructions. You need to specify a path, for example:

https://websiteurl/commands.txt

TAP will check that path every two minutes looking for new commands.

IMPORTANT. The first line of the text file MUST contain “EXECUTE COMMAND” (without the double quotes). Once TAP identifies this, it will check to see if the command was executed before and if not it will execute the commands line by line. This is useful when you lose connection with TAP and need to call execute commands to fix it.

Once you run setup, it will install the files in /usr/share/tap. It will automatically start if you specify, and will automatically check for updates such as Debian updates, TAP updates, etc.

TrustedSec recommends the Intel NUC series with a solid-state drive, 16 gigs of ram, wireless alfa attached for wireless assessments, and a Verizon LTE card so you don’t have to worry about egress filtering if it isn’t available. Recommend IPTables off EVERYTHING except for the IP addresses that you want the remote connection coming to, and block all incoming connections.

You should also whitelist the update servers if you are using Debian as well as your REMOTE box you connect back to.

 

SSH VPN

In the event that you decide not to use SSH keys and use passwords, the config stores it in an AES format (requires python-pycrypto). If you need to update the password, go to the scripts directory which has an update-password script to update the encrypted password and create a new dynamic cipher key.

Also a neat trick once you are there is a small tool Dace Kennedy wrote for basically a SSH VPN. This works out great if you aren’t doing large traffic volumes such as port scans, vulnerability scans, etc. The below is a simple tool that wraps sshuttle to create the VPN. Just save the below file into a python file and run and use the commands. It’ll VPN you in to the remote network where TAP is deployed. You can do anything such as long as it isn’t extremely large volume traffic (pretty stable).

There’s two ways to handle a VPN, first is through the method below with SSHuttle. You can also use a transparent VPN that was created by Geoff Walton at TrustedSec that is located in the under the scripts folder. This will create a TAP interface and VPN you into the system through SSH. With SSHuttle, things like port scans do not work properly, would highly recommend the ssh-tunnel script.

import os import subprocess import time

if not os.path.isfile("/usr/sbin/sshuttle"): print "[!] SSHUTTLE does not appear to be installed, installing now" subprocess.Popen("apt-get install sshuttle -f", shell=True).wait()

print "Welcome to the sshuttle wrapper for TAP." print "Enter the address for the SSH server, i.e. box.sshserver.com" reverse1 = raw_input("Enter SSH server (REMOTE server): ") reverse2 = raw_input("Enter the remote SSH port for %s:: " % (reverse1)) reverse3 = raw_input("Enter the port to tunnel for the local TAP machine (i.e. TAP box localhost port): ") reverse4 = raw_input("Enter the username to connect to REMOTE system: ") print "Triggering tunnel now..." time.sleep(2) subprocess.Popen("ssh -f %s@%s -L %s:localhost:%s -N" % (reverse4, reverse1, reverse3, reverse2), shell=True).wait() subprocess.Popen("sshuttle --dns -vr %s@localhost:%s 0/0" % (reverse4,reverse3), shell=True).wait()

 

Using Proxy Chains

TAP uses proxychains4 (proxychains-ng) to tunnel all of your http/https traffic through SSH to your remote box. This helps with content/egress filtering so you can ensure you always have everything up-to-date. In order to use proxychains, just type proxychains4 – TAP updates automatically use this.

 

Logging

TAP during the setup process will prompt you to see if you want to log all commands executed on the system. If you do, all commands that are entered on the system will be logged so that you can provide to the customer or keep records of what happened on the devices. All logs are saved under /var/log/messages.

 

Supported Operating Systems

Ubuntu 14.04 LTS (should work fine on debian and other ubuntu versions)

 

Github Project